Every probe in the MNEMOS ecosystem lives here. Browse certified hardware, contribute your own sensor definition, or fork an existing design to build something new.
High-accuracy 4-wire RTD probe with onboard 24-bit ADC and TEDS v1.0 EEPROM. Rated −200°C to +850°C, ±0.1°C accuracy.
I²C
TEDS v1.0
1 channel
OfficialVibration
MEMS Triaxial Accelerometer
Continuis Labs Reference Design
High-bandwidth 3-axis MEMS accelerometer with 16-bit resolution. Supports up to 10kHz sample rate for structural health monitoring and rotating machinery analysis.
SPI
TEDS v1.0
3 channels
OfficialGas / AQ
NDIR CO₂ Sensor
Continuis Labs Reference Design
Non-dispersive infrared CO₂ measurement with automatic baseline correction. Range 0–10,000ppm, ±30ppm accuracy. Ideal for HVAC, indoor air quality, and greenhouse monitoring.
UART
TEDS v1.0
1 channel
OfficialPressure
Piezoresistive Pressure Gauge
Continuis Labs Reference Design
Industrial-grade pressure transducer with stainless-steel wetted parts. 0–10 bar range, 0.05% FSO accuracy. Suitable for hydraulic and pneumatic systems.
I²C
TEDS v1.0
1 channel
CommunityHumidity
SHT40 Temperature + Humidity
Sensirion AG — Community Submission
High-accuracy digital temperature and humidity sensor with ±1.8% RH and ±0.2°C accuracy. Low power draw makes it ideal for battery-powered nodes.
I²C
TEDS v1.0
2 channels
CommunityPower
Split-Core CT Current Clamp
Yhdc Electronics — Community Submission
Non-invasive 100A split-core current transformer with 4–20mA output. No rewiring required — clamp around existing conductors for instant power monitoring.
Analog
TEDS v1.0
1 channel
CommunityIMU
9-DoF IMU Module
STMicroelectronics LSM9DS1 — Community Port
9-axis inertial measurement unit combining accelerometer, gyroscope, and magnetometer. Designed for joint torque estimation, robot proprioception, and motion capture.
SPI
TEDS v1.0
9 channels
CommunityAcoustic
MEMS Microphone Array
InvenSense — Community Port
PDM MEMS microphone with digital output. Used for acoustic emission monitoring on rotating machinery, anomaly detection via sound spectrum analysis, and leak detection.
I²C/PDM
TEDS v1.0
1 channel
CommunityChemical
pH / ORP Water Probe
Atlas Scientific — Community Port
Industrial pH and oxidation-reduction potential probe with isolated UART output. Range pH 0–14 ±0.002, ORP ±2000mV. Suitable for water treatment and aquaculture.
UART
TEDS v1.0
2 channels
CommunityFlow
Ultrasonic Flow Meter
Keyence — Community Port
Clamp-on non-invasive ultrasonic flow measurement for pipes 13–400mm diameter. No process penetration required. Accuracy ±1% of reading for liquids.
UART
TEDS v1.0
1 channel
CommunityForce / Torque
6-DoF Force-Torque Sensor
ATI Industrial Automation — Community Port
Six-axis force and torque transducer for robotic wrist mounting. Provides Fx, Fy, Fz forces and Tx, Ty, Tz torques at 7kHz. Critical for collaborative robot safety and assembly verification.
SPI
TEDS v1.0
6 channels
CommunityOptical
Particle Counter (PM2.5 / PM10)
Plantower PMS7003 — Community Port
Laser scattering particle concentration sensor for PM1.0, PM2.5, and PM10 measurement. Used in air quality monitoring, cleanroom compliance, and HVAC filter status.
Forge is open to any hardware that speaks PDP. Submit a TEDS descriptor via pull request or the API, and your probe becomes instantly discoverable by every Vigil deployment worldwide. Official certification takes 3–5 business days.